There are various reasons why you might be considering buying a new fiber media converter. Maybe your old fiber media converter got dusted off, so to speak — meaning it doesn’t work anymore. Perhaps you were in the middle of using it and it suddenly and inexplicably stopped working, and your network went down as a result.
Why buy a new fiber media converter?
Other reasons you might be considering a new one are that you want a better fiber media converter with more features or support for higher speeds, or that you want an SFP fiber media converter with multiple SFP ports instead of an older SC-type fiber media converter. After all, they don’t have a long shelf life. They will eventually break down. The key to replacing your old fiber media converter is to know what you are looking for in a new fiber media converter.
Is your fiber media converter a lightning bolt or a turtle?
Maybe your fiber media converter seems to be in “turtle” mode, which means it’s losing performance and is no longer capable of handling your network traffic. Well, it’s time to buy a fiber media converter with higher speed and support for multiple ports. The higher the rate, the faster your network transmissions will be.
Fiber media converters stopped Working.
Maybe the fiber media converter you’ve been using suddenly stopped working? And you’ve tried everything, but you can’t get it to work anyway. You can check to see if the power is connected, or if the cables and fiber are intact and if the network is configured correctly to determine if there is a problem with the fiber media converter itself. If none of these checks are successful, it may be time to purchase a new fiber media converter.
Is your fiber media converter features more ports?
The number of ports on a fiber media converter depends on the device's capabilities. A typical conventional fiber media converter may have one fiber port and one RJ45 port. In contrast, a fiber media converter for an extensive network may have up to 4 fiber ports and more than 8 RJ45 ports. Fiber media converters with more ports can support higher transmission capacity and link more routers or fiber media converters.
Consider your cost budget
The amount you accelerate on a network fiber media converter determines the functionality of the fiber media converter. If your cost budget is less than $100, there is no need to consider a high-end model. You can consider fully meeting your basic needs first, and then consider whether other features in the fiber media converter are needed.
However, if you need to buy a high-end model or want to use more features such as POE. TP-Link, D-Link, and other big brands of fiber media converters you should buy first. At the same time, you can also choose SFP to Ethernet media converter as needed, so that you can directly purchase new SFP optical modules when upgrading your network in the future, instead of buying new fiber media converters, thus protecting your investment. Compare all; you can choose the one that best suits your needs and cost budget.
Conclusion
To be more friendly, there recommended the store Optcore.net which ensured all their fiber media converter meet the clients’ needs 100%. The store sells a lot of cost-effective Ethernet media converters and SFP transceivers. They cost less, but all have reasonable quality assurance. Visit our product page and use the filters on the left side of the page to find the best new fiber media converter for your needs.
Comments
Post a Comment